Üretim hattı:
Perakende ve market zincirleri için ticari dondurucu üretim hatları
We manufacture commercial freezer production lines — island freezers, glass-door merchandisers, supermarket freezer units. High-pressure PU, 500 – 5,000 units/day.
In one line
Optimized for the unattended-retail form factor — low-height island freezer moulds and anti-fog glass-door hardware specifically tuned for convenience and supermarket applications.
Real Pains We Hear from Buyers — and What We Ship to Solve Each One
Four pains commercial-freezer factories hit when scaling for retail-chain tenders. Our line clears each one.
Glass-door anti-fog hardware fails in tropical humid stores — store complaints + warranty replacements eating margin
Anti-fog is heated-perimeter wattage + door seal geometry working together. Our UDM-COMBO door mould sets the seal channel geometry for proper Schott / Saint-Gobain dual-pane door fit; we ship the heated perimeter strip with calibrated 4 W/m wattage zoned by climate (tropical / temperate / cold). Field anti-fog failure rate drops from 6% to <0.5% over 24 months.
Retail-chain tender requires ENERGY STAR + EU Ecodesign — my last cabinet failed both pull-down tests
Pull-down tests fail when foam thermal performance + cabinet airflow + compressor sizing don't align. We ship the line with a pull-down to -40°C test rig built in, with sensors at 12 points inside the cabinet. Run trial cabinets through it before submitting to ENERGY STAR / Ecodesign labs — first-submission pass rate goes from 50% to 90%+.
Convenience-store buyer wants both island freezer and glass-door merchandiser — buying 2 separate lines is impossible
One line, quick-change moulds covering both formats. The PU foaming machine, mould fixture and assembly conveyor are shared; only the cabinet mould + door mould change between island and merchandiser. Changeover 60–90 min. Throughput hit is 25–30%, but capex saved is ~USD 1.5M vs two dedicated lines. Sweet spot: combined volume 500–3,000 units/day.
24/7 duty cycle — first-year warranty replacement rate is 3–4%, killing my channel margins
Commercial freezer warranty failures cluster in 3 places: door hinge fatigue (200K+ open cycles), gasket frost-line failure, glass-pane seal leak. Our line addresses each: high-cycle-rated hinges (Sugatsune / Hettich brands), heated-gasket perimeter, dual-pane sealed glass with leak-test on every unit. Year-1 warranty rate target: <0.8%.
İhtiyacınız Olan
26-Station Ground-Rail PU Foaming Line for Refrigerator Doors — Closed-Loop Track Layout
Closed-loop ground-rail PU foaming line dedicated to refrigerator and cabinet DOOR foaming. 26 fixture stations on a continuous steel track, 20-sec cycle, 3,000–6,000 doors per shift. 2,000 × 900 mm fixture × 200 mm closing height — sized for door panels. Cyclopentane + ATEX Zone 1, steam or oil heating.
Daha Fazla Bilgi
Hardware & Accessories — Bundled with Main Equipment Orders
Complementary hardware fabrication service — supplied alongside our main equipment orders (moulds / PU foaming / production line). Custom-fabricated per your drawings: 5 categories — hinges, brackets, rails & ladders, wire shelves & baskets, grid panels. Not a standalone product line. Consolidated into your main shipment.
Daha Fazla Bilgi
Cyclopentane High-Pressure PU Foaming Machine
Our flagship — purpose-built for refrigerator factories chasing A+++ energy class. Cyclopentane-ready out of the box with full ATEX Zone 1 safety package. Three sizes covering 500 to 8,000 cabinets a day.
Daha Fazla Bilgi
Mold for Upright Glass-Door Display Cabinet
Refrigerator mould (mold) for display cabinets — cast aluminium PU foaming mould for single / double / triple glass-door beverage display cabinets and supermarket display refrigerators. Up to 1,900 × 700 × 1,300 mm, ~30 s/shot.
Daha Fazla Bilgi
Mold for Supermarket Island Freezer
Refrigerator / freezer mould (mold) for supermarket island freezers — long-cavity cast aluminium mould for 2–3 m island freezer cabinets. Single-gun-head one-end horizontal filling for low-defect long-cabinet foaming. Up to 2,600 × 1,100 × 1,100 mm.
Daha Fazla Bilgi
PU Raw Materials System
We make refrigerator-grade PU systems — polyol blend, MDI, blowing agent, all formulated in our own plant. k-factor down to 0.018, density customizable, tuned to your cabinet and your line.
Daha Fazla BilgiCabinet models you can produce on this line
Every row below is a real cabinet SKU that customers already produce using the moulds in this line — temperature class, capacity, compressor, refrigerant and overall dimensions are field-tested. Use the matrix to match your target cabinet to the right mould configuration.
| Cabinet model | Variant | Temperature (°C) | Volume (L) | Power (W) | Weight (kg) | Compressor | Refrigerant | Size (mm) | Source mould |
|---|---|---|---|---|---|---|---|---|---|
| SD/SC-2000K | — | ≤-18 | 748 | 480 | 95 | DONPER / WANBAO | R290 | 2000 × 1035 × 880 | Mold for Supermarket → |
| SD/SC-2200K | — | ≤-18 | 868 | 480 | 110 | DONPER / WANBAO | R290 | 2200 × 1035 × 880 | Mold for Supermarket → |
| SD/SC-2600K | — | ≤-18 | 998 | 645 | 135 | DONPER / WANBAO | R290 | 2600 × 1035 × 880 | Mold for Supermarket → |
| SD/SC-3600K | Extra-wide deep-bottom | ≤-22 | 2016 | 1560 | 195 | DONPER / WANBAO | R290 | 3605 × 1569 × 930 | Mold for Supermarket → |
| LC-620FX | Single-door refrigeration | -2–8 | 620 | 262 | 75 | DONPER / WANBAO | R290 | 620 × 725 × 2065 | Mold for Upright → |
| LC-1260FX | Double-door refrigeration | -2–8 | 1113 | 374 | 145 | DONPER / WANBAO | R290 | 1260 × 725 × 2065 | Mold for Upright → |
| LD-1260FX | Double-door freezing | ≤-18 | 1066 | 911 | 200 | DONPER / WANBAO | R290 | 1260 × 725 × 2065 | Mold for Upright → |
| LC-1860FX | Triple-door refrigeration | -2–8 | 1685 | 583 | 200 | DONPER / WANBAO | R290 | 1860 × 725 × 2065 | Mold for Upright → |
| LD-1860FX | Triple-door freezing | ≤-18 | 1670 | 1395 | 260 | DONPER / WANBAO | R290 | 1860 × 725 × 2065 | Mold for Upright → |
Source: UREXCEED catalog §07 OEM/ODM cabinet series, cross-referenced to the mould that produces each SKU. Custom cabinet sizes outside this range supported — send us your cabinet drawing for a 7-day quote.
From inquiry to first commercial unit — the 6-step delivery flow
From inquiry to first commercial freezer rolling off your line. ~12 months for a standard 2,000 units/day commercial freezer / merchandiser line.
- 1
Inquiry & Format Mix Scoping
Week 1–2Share target capacity, format mix (island freezer / glass-door merchandiser / convenience-store cabinet), target retail-chain customers (Walmart / 7-Eleven / Carrefour spec required). We send a 1-page proposal with line layout and price range.
- 2
Detailed Proposal & Tender-Compliance Roadmap
Week 2–4If you're bidding for a specific retail-chain tender (ENERGY STAR / Ecodesign / Carrefour spec), share the tender doc — we map our equipment to each compliance requirement. Mould variants picked, PU machine sized, glass-door + anti-fog hardware specced. Quote with 24-line BOM in 14 days.
- 3
Contract & Cabinet + Door Design Freeze
Week 4–830% down. Cabinet CAD + door CAD review with extra attention to glass-pane geometry and hinge mounting (Sugatsune / Hettich specifications). Mould CAD frozen before CNC starts.
- 4
Mould + Glass-Door Station Build
Month 3–7Cabinet moulds + door moulds: 60–90 days. PU machine: 45–60 days. Glass-door alignment + anti-fog hardware assembly stations: 45 days. Pre-shipment FAT — we run trial merchandisers in our shop and ship the pull-down test report.
- 5
Sea Freight & On-Site Installation
Month 7–105–7 × 40' containers from Shanghai/Ningbo. On-site installation by 5–7-person engineer team, 3–4 weeks. Reinforced foundation for foaming station, dedicated electrical for glass-door heated-gasket circuits.
- 6
Commissioning, Pre-Certification Testing & Acceptance
Month 10–12First 100 trial merchandisers built and tested through pull-down rig. ENERGY STAR / Ecodesign pre-submission test pack prepared on first 5 units. Operator training. Acceptance signed when 50 consecutive units pass pull-down + leak-test + electrical-safety spec. 60% payment due here, 10% after 6-month warranty-rate verification.
Heavy-duty retail refrigeration
Retail Merchandiser Configuration
Retail-chain tenders spec cabinets to the millimeter. 4 axes you can choose per tender without re-tooling.
Format
Island freezer (low-profile 600–900 mm) / glass-door merchandiser / convenience-store cabinet. Quick-change moulds 60–90 min.
Glass-door & anti-fog
Dual-pane sealed glass (Schott / Saint-Gobain), heated perimeter strip wattage zoned by climate (tropical 4–6 W/m).
Compliance target
ENERGY STAR / EU Ecodesign / Carrefour / Walmart spec. Pull-down to -40°C test rig built in. NSF Standard 7 optional.
Hinge & gasket
Sugatsune / Hettich 200K-cycle-rated hinges, heated perimeter gasket for frost-line resistance. Premium hardware locked per tender.
Shared engineering reference
PU foam quality, testing and acceptance
Closed-cell ratio, density uniformity and thermal testing are documented once in our quality center.
Recent deliveries in this category
Saudi Arabia — Bakery Display Cabinets
Bakery display cabinet project, 500 units/day
Brazil — Chest Freezer Line Expansion
Chest freezer line expansion, 2,000 units/day
Questions factory owners ask us
How is a commercial freezer line different from a household freezer line?
What does a glass-door merchandiser line add versus a solid-door freezer line?
Can one line produce both island freezers and upright glass-door merchandisers?
Typical investment for a 2,000 units/day commercial freezer line?
Do you supply the retail-chain compliance certifications (ENERGY STAR, EuroSpec)?
ROI · Cost Analysis
Investment Range & Payback
Indicative range based on 1,800+ delivered lines. Final pricing depends on automation level + add-ons + local labor cost. Request a quote for your spec.
Configuration note: Heavy-duty commercial: high-pressure cyclopentane + reinforced cabinet structure + drop-in evaporators. Lower volume but higher ASP, longer ROI.
Service & Support
Warranty & Service
On-site intervention available in every region where we have delivered projects.
On-Site Installation
Our engineers fly to your factory to supervise installation, layout verification, and first-run production.
Commissioning + Tuning
Trial run + parameter tuning to your local raw material, climate, and target product spec — until throughput meets contract.
Operator Training
5-10 day on-site training for production team, QC, and maintenance — bilingual manuals + video tutorials provided.
3-Year Warranty + Spares
Core equipment 3-year warranty, electrical 2-year. Spare parts in stock with global express shipment 24h dispatch.
Cross-Sell · One-Partner Synergy
Pair this line with the rest of the factory
The product groups our refrigerator-factory customers buy alongside this line — for full-line synergy and one-partner accountability.
High-Pressure PU Foaming Machines
Cyclopentane / 2-component / 3-component models. Cyclopentane is the refrigerator industry standard.
Learn more
Refrigerator-grade Moulds
Vacuum-forming moulds for inner liners + foaming moulds for cabinet/door. 30-year mould-cluster network.
Learn more
PU Raw Materials System
BASF / Covestro / Wanhua MDI + Polyol — calibrated to your climate, foam density, and cycle time.
Learn more