1. Производительность
Задаёт такт и уровень автоматизации
- Штук в день и смен в день
- Доли моделей 1,2 / 1,8 / 2,4 м
- Двери или ящики
- Пиковый объём заказа сети ресторанов
Решения для
Производственные линии для холодильных столов-основ — поставки OEM-производителям профессиональных кухонь
Холодильные столы-основы (chef base) и холодильные рабочие столы — фундамент каждой профессиональной кухни: столешница из нержавеющей стали сверху, ПУ-изолированный холодильный шкаф снизу. Мы поставляем вакуум-формовочную оснастку, пресс-формы для вспенивания, высокопроизводительную линию вспенивания ПУ под высоким давлением и сборочную инфраструктуру для выпуска 200 – 2 000 единиц в сутки в типоразмерах от 1,2 м до 2,4 м.
In one line
Вспенивание корпусов малой высоты с допуском ±1 мм по геометрическим размерам — косметический стандарт уровня HoReCa, которого требуют ваши покупатели.
Что вам нужно
Фурнитура и аксессуары
Фурнитура и комплектующие
Петли, уплотнения, ручки, LED освещение, испарители и конденсаторы
Подробнее
Оборудование для ППУ — высокого / низкого давления, напыления, дозирования
Пенообразующая машина высокого давления
100–1500 г/с, 2–4 компонента, Siemens PLC
Подробнее
Производственные линии — холодильники, морозильники, холодильные камеры под ключ
— 6-8 станционная линейная ППУ-линия производства (многоспецификационное смешанное производство)
the linear line линейное in-line ППУ-вспенивание для малых и средних производителей холодильников. 6–8 станций · 30-секундный цикл · многоспецификационное смешанное производство · одно-головочный горизонтальный налив · ≤190 кВт.
Подробнее
Пресс-форма пенополиуретан / холодильник — вакуумное формование, пенообразующие, дверные
Пресс-форма для холодильного рабочего стола (chef base)
Пресс-форма для рабочих холодильных столов (chef base) — литая алюминиевая ППУ-пресс-форма для шкафов chef base / станций приготовления сэндвичей / пиццы / салатов. Поддерживает 2-дверные, 3-дверные, 4-дверные варианты до 2 600 × 1 100 × 1 100 мм. Время отверждения 6–20 мин, регулируется.
Подробнее
Сырьё ПУ
Сырьё ПУ система
Полиол + изоцианат + порообразователь, k-фактор до 0,018
ПодробнееCabinet models you can produce on this line
Every row below is a real cabinet SKU that customers already produce using the moulds in this line — temperature class, capacity, compressor, refrigerant and overall dimensions are field-tested. Use the matrix to match your target cabinet to the right mould configuration.
| Cabinet model | Variant | Temperature (°C) | Volume (L) | Power (W) | Weight (kg) | Compressor | Refrigerant | Size (mm) | Source mould |
|---|---|---|---|---|---|---|---|---|---|
| PLR-12N2 | Refrigeration (2-door) | 5–10 | 157 | 195 | 48 | DONPER / WANBAO | R290 | 1200 × 600 × 800 | Пресс-форма для холодильного → |
| PLR-15N2 | Refrigeration (3-door) | -5–10 | 220 | 195 | 55 | DONPER / WANBAO | R290 | 1500 × 600 × 800 | Пресс-форма для холодильного → |
| PLR-18N2 | Refrigeration (4-door) | -5–10 | 284 | 204 | 62 | DONPER / WANBAO | R290 | 1800 × 600 × 800 | Пресс-форма для холодильного → |
| PLD-12N2 | Freezing | ≤-15 | 157 | 204 | 48 | DONPER / WANBAO | R290 | 1200 × 600 × 800 | Пресс-форма для холодильного → |
| PLD-15N2 | Freezing | ≤-15 | 220 | 204 | 55 | DONPER / WANBAO | R290 | 1500 × 600 × 800 | Пресс-форма для холодильного → |
| PLS-15N2 | Dual-temperature | -5–10 | ≤-15 | 209 | 204 | 55 | DONPER / WANBAO | R290 | 1500 × 600 × 800 | Пресс-форма для холодильного → |
| PLS-18N2 | Dual-temperature | -5–10 | ≤-15 | 273 | 223 | 62 | DONPER / WANBAO | R290 | 1800 × 600 × 800 | Пресс-форма для холодильного → |
Source: UREXCEED catalog §07 OEM/ODM cabinet series, cross-referenced to the mould that produces each SKU. Custom cabinet sizes outside this range supported — send us your cabinet drawing for a 7-day quote.
From inquiry to first commercial unit — the 6-step delivery flow
From inquiry to first chef base off your line. ~10 months total for a standard 800 units/day chef base line.
- 1
Inquiry & Capacity Sizing
Week 1–2You share target capacity, cabinet size mix (1.2 m / 1.8 m / 2.4 m), door variants (2/3/4-door), target export markets (US NSF vs EU CE). We send a 1-page proposal with line layout and price range within 5 working days.
- 2
Detailed Proposal & Variant Strategy
Week 2–4Engineering team picks modular insert vs dedicated mould strategy based on your variant volume. Mould models picked from our chef base template library, PU machine sized, fixture configured. Final quote with 18-line BOM breakdown delivered in 14 days.
- 3
Contract & Cabinet Design Freeze
Week 4–730% down payment. Cabinet CAD review — you send your final cabinet drawings (DWG/STEP) including stainless top interface dimensions, we convert to mould design, you approve the mould CAD + stainless-top bolt pattern before machining starts.
- 4
Manufacturing & Pre-NSF Test Rig Build
Month 3–6Moulds: 45–60 days CNC + heat treatment. PU machine: 45–60 days in parallel. Pre-NSF test rig (drop + pull-down + dielectric): 30 days. Each item tested in our QC lab. Monthly progress reports + video walkthroughs.
- 5
Sea Freight & On-Site Installation
Month 6–84–6 × 40' containers ship from Shanghai/Ningbo. On-site installation by 4–6-person engineer team, 2–3 weeks. Floor reinforcement for foaming station (~150 kN clamping load).
- 6
Commissioning, Cosmetic-Finish Training & NSF Pre-Test
Month 8–10First 50 trial chef bases foamed + stainless-fitted + cosmetic-finished together with your operators. We run 5–10 units through the pre-NSF rig and hand over the NSF submission checklist. Acceptance signed when 30 consecutive units pass dimensional + flatness + cosmetic spec. 60% payment due here.
Почему эта линия работает — цифры берутся из реального оборудования
Chef base buyers (HoReCa supply chains, restaurant chain procurement) demand a different combination than household refrigerator OEMs — flatness, stainless-steel top integration, and a chef-base-specific cabinet geometry. Here's how our line is built for that.
1
Cabinet mould cavity geometry tuned for low-profile 600–900 mm height
Our Refrigerated Workbench mould (UMD-WB-2600) is engineered around real chef base / sandwich prep / pizza prep cabinet families — 2-door / 3-door / 4-door variants up to 2,600 × 1,100 × 1,100 mm. Cavity precision ±0.05 mm ensures the stainless top sits flush, doors close clean, and your customer never gets a "wobbly counter" complaint.
2
High-pressure PU foaming with quick-change mould carrier
Our cyclopentane high-pressure machine (UPM-HP-1500) handles the polyol+ISO+blowing-agent mix at ±0.5% metering accuracy. Paired with our refrigerator mold fixture (5-ton adjustable clamping), one fixture station handles your full 2/3/4-door variant range — changeover in 15–30 min, instead of buying separate fixtures per SKU.
3
Buyer-perceived quality where it counts — flatness, door gap, top-edge weld
Chef base buyers (chefs, restaurant operators) judge quality in 3 seconds: is the top flat, do drawers slide, does the stainless edge feel smooth. Our line ships with a flatness gauge station (±0.5 mm across 2.4m), Bosch hinge fittings, and a top-edge polishing protocol. These details are why your sales rep gets repeat orders.
4
Volume economics: 800 chef bases/day with 18-month payback at typical USA pricing
A turnkey chef base line at 800 units/day sells the produced cabinets at USD 1,200–2,500 wholesale into US/EU foodservice supply chains. Line capex USD 1.2M–2M. Payback in 18–28 months at 65% capacity. The math gets better when you add HVAC + cigar cabinet variants on the same line — see our cross-sell to other Solutions.
Foodservice cabinet engineering
Stainless Worktop & Long-Cabinet Engineering
HoReCa buyers spec everything from cabinet width to top finish. Our line ships with 4 customization axes pre-built in.
Cabinet width & door config
1.2 m / 1.8 m / 2.4 m widths × 2-door / 3-door / 4-door variants on modular insert mould. Changeover 30–60 min.
Stainless top spec
304-grade stainless, 1.0–1.5 mm thick, #4 or #8 polish finish. Bolt jig for your sourced top (Tisco / POSCO / Jindal coil).
Refrigeration spec
+2 to +8°C standard; -2 to +4°C deli config; dual-temperature with shared compressor. Embraco / SECOP compressor choices.
Certification target
CE (EU) / NSF Standard 7 (US foodservice) / ETL / SASO (Saudi). Pre-NSF test rig included with line.
Shared engineering reference
PU foam quality, testing and acceptance
Closed-cell ratio, density uniformity and thermal testing are documented once in our quality center.
Вопросы, которые задают владельцы заводов
Can you supply only the custom foaming fixture, without a complete line?
Fixture-only supply is confirmed project by project by our sales and engineering teams; do not assume it is included before that review. Send the cabinet drawing, target output and current PU-equipment details. We will state in the quotation whether the scope can be limited to the fixture and which machine-side items, controls or site services remain with the buyer.
What drawings and machine-interface data are required to design a cabinet foaming fixture?
Send the controlled cabinet assembly DWG or STEP file plus a dimensioned PDF, material stack-up, foam-wall definition, embedded parts, injection point, door or drawer variants, target output, loading direction, mixing-head envelope, machine make and model, utilities and required FAT checks. Connection to a third-party foaming machine is assessed case by case and confirmed in the interface list before design freeze; there is no blanket compatibility claim.
Why is chef base cabinet design different from a household refrigerator cabinet?
Three reasons. (1) Aspect ratio: chef bases are wide and shallow (typically 1,200–2,400 × 600–700 × 800–900 mm), not deep and tall. (2) Top integration: a stainless steel worktop bolts to the cabinet — flatness within ±0.5 mm across 2.4m is required. (3) Door pattern: 2-door / 3-door / 4-door horizontal layouts (not the single tall door of household). The mould cavity geometry and the fixture clamping pattern need to be designed for this — using a household mould for chef base gives you wavy tops and warped doors.
What is the typical line investment for 800 chef bases/day?
USD 1.2M – 2.0M total. Breakdown: foaming moulds (USD 250K–400K covering 2-door / 3-door / 4-door variants), high-pressure PU machine (USD 180K–280K), mold fixture (USD 120K–200K), assembly conveyor and stainless top integration (USD 250K–400K), quality stations + testing (USD 200K–350K), commissioning + training (USD 100K–150K). Building land and stainless steel sheet stock not included.
How do you handle 3-door vs 4-door variants without buying 4 separate moulds?
Two ways. (1) Modular mould inserts — same base mould with snap-in 2/3/4-door dividers (changeover 30–60 min). Lower capex but slightly more wear on the dividers. (2) 3 separate moulds in a family pricing bundle — more capex but zero changeover time, recommended once you cross 500 units/day. Most factories start with modular and upgrade.
What certifications does the line ship with — and what about US NSF certification for foodservice?
Our equipment ships with CE + ISO 9001. The finished chef base needs cabinet-level NSF (US foodservice certification, mandatory for restaurant sales) or its EU equivalent (CE for food contact + EN 14644 for clean kitchen). We supply the test fixtures (drop test, temperature retention test, ETL-recognized refrigerant loop) — you submit the finished cabinet to NSF/ETL for certification (8–14 weeks turnaround).
Stainless steel top — do you supply that, or do I source separately?
Top is sourced separately — stainless 304 grade, 1.0–1.5 mm thick, polished to #4 or #8 finish. We can recommend stainless coil mills in our network (China Tisco, Korea POSCO, India Jindal) and ship the bolt/weld jig that mates the top to the cabinet. Most chef base factories pre-buy stainless coil annually and roll-form their own tops in-house — that's where the real margin lives.
ROI · Cost Analysis
Investment Range & Payback
Indicative range based on 1,800+ delivered lines. Final pricing depends on automation level + add-ons + local labor cost. Request a quote for your spec.
Investment
USD 400K – 1.2M
Payback
14–22 months
Annual Throughput
15K–50K units/year
Configuration note: Mid-pressure foaming + 2-3 chef-base cabinet moulds + assembly station. ROI faster than refrigerator due to simpler product geometry.
Service & Support
Гарантия и сервис
Выезд на объект возможен во всех регионах, куда мы поставляли проекты.
On-Site Installation
Our engineers fly to your factory to supervise installation, layout verification, and first-run production.
Commissioning + Tuning
Trial run + parameter tuning to your local raw material, climate, and target product spec — until throughput meets contract.
Operator Training
5-10 day on-site training for production team, QC, and maintenance — bilingual manuals + video tutorials provided.
3-Year Warranty + Spares
Core equipment 3-year warranty, electrical 2-year. Spare parts in stock with global express shipment 24h dispatch.
Cross-Sell · One-Partner Synergy
Pair this line with the rest of the factory
The product groups our refrigerator-factory customers buy alongside this line — for full-line synergy and one-partner accountability.
Foaming
High-Pressure PU Foaming Machines
Cyclopentane / 2-component / 3-component models. Cyclopentane is the refrigerator industry standard.
Learn more
Moulds
Refrigerator-grade Moulds
Vacuum-forming moulds for inner liners + foaming moulds for cabinet/door. 30-year mould-cluster network.
Learn more
Materials
PU Raw Materials System
BASF / Covestro / Wanhua MDI + Polyol — calibrated to your climate, foam density, and cycle time.
Learn moreИсходные данные для расчёта линии
Пришлите 3 группы данных для технически обоснованного предложения
Проект линии начинается с целевой производительности, заготовок шкафов и плана оснастки. Для первичной проверки достаточно эскизов; до расчёта цены инженеры укажут недостающие размеры.
2. Заготовка
Задаёт габарит формы и рецептуру
- Габариты Д × Ш × В и проёмы ящиков
- Толщина нержавеющей стали 304 и столешницы
- Толщина PU-стенки и целевая температура
- Нагрузка кухонного оборудования на столешницу
3. Оснастка
Задаёт запас на отверждение и смену модели
- Опора длинного корпуса и защита от прогиба
- Приспособления для дверей/фасадов ящиков
- Имеющиеся кондукторы, базы и зажимы
- Время отверждения, загрузка и цель смены модели
Принимаем PDF, STEP, DXF, DWG, фото с размерами или спецификацию текущего изделия. Если чертежей нет, начните с Д × Ш × В и толщины стенки.
Отправить 3 группы данных в WhatsAppБыстрый ответ от инженера
Два способа связаться с нами — заполните форму из 5 полей ниже или напишите инженеру проекта напрямую в WhatsApp.